Litujeme, společnost nabízející danou pracovní pozici ukončila zveřejnění nabídky na stránce.
Děkujeme za pochopení.
Zobrazit podobné nabídky
Děkujeme za pochopení.
Zobrazit podobné nabídky
Process Engineering Manager
c2i s.r.o.
Place of work
District Dunajská Streda
District Dunajská Streda
Contract type
full-time
full-time
Start date
Dohodou
Dohodou
Wage (gross)
Dohodou
Dohodou
Information about the position
Job description, responsibilities and duties
Main aim of the position:
- Ensure that series production fulfills the requirements of the customer
- Support the process of continuous improvement
- Ensure the plant is prepared for the launch of a new project
- Manage and report KPIs
Key tasks and responsibilities:
- Directly manage all process engineers
- Purchasing of production technology and equipment
- Support of the ERCs – engineering change requests
- Development of the production process with following outcomes:
- Definition of materials (in cooperation with engineering) esp. consumables
- Definition of the production technology (in cooperation with engineering and customer)
- Developing customer production technology where necessary
- Development of work instructions for all production processes (lamination, demoulding, tool handling, CNC machining, hand trimming/de-burring, bonding, assembly, lacquering)
- Definition of norm times
- Full MIFA – materials and information flow analysis
- Keeping the work instructions and work routines up-to-date
- Computerizing the work instructions via monitors in production which load the required work instruction which contains custom content for the given operator based on his/her quality defects
- Keeping the procedures in line with HSE regulations and quality management system ISO TS 16949
- Budget creation for the process engineering department and responsible for plant CAPEX for production equipment
- Updating the plant lay-out after every change
- Planning, monitoring and coordination of external companies
- Supporting problem solving activities
- Ensure that series production fulfills the requirements of the customer
- Support the process of continuous improvement
- Ensure the plant is prepared for the launch of a new project
- Manage and report KPIs
Key tasks and responsibilities:
- Directly manage all process engineers
- Purchasing of production technology and equipment
- Support of the ERCs – engineering change requests
- Development of the production process with following outcomes:
- Definition of materials (in cooperation with engineering) esp. consumables
- Definition of the production technology (in cooperation with engineering and customer)
- Developing customer production technology where necessary
- Development of work instructions for all production processes (lamination, demoulding, tool handling, CNC machining, hand trimming/de-burring, bonding, assembly, lacquering)
- Definition of norm times
- Full MIFA – materials and information flow analysis
- Keeping the work instructions and work routines up-to-date
- Computerizing the work instructions via monitors in production which load the required work instruction which contains custom content for the given operator based on his/her quality defects
- Keeping the procedures in line with HSE regulations and quality management system ISO TS 16949
- Budget creation for the process engineering department and responsible for plant CAPEX for production equipment
- Updating the plant lay-out after every change
- Planning, monitoring and coordination of external companies
- Supporting problem solving activities
Information about the selection process
V prípade, že Vás daná ponuka zaujala prosíme Vás o zaslanie životopisu a motivačného listu v slovenskom jazyku aj v anglickom na doleuvedenú emailovú adresu.
Pre množstvo reakcií, budeme kontaktovať len vybraných uchádzačov.
Do predmetu správy prosíme uviesť názov pozície o ktorú sa uchádzate.
K životopisu pripojte aj nasledujúci text, bez ktorého nebude možné Vašu žiadosť ďalej spracovať:
„ Osobné údaje vyplnil priamo uchádzač a dal súhlas spoločnosti c2i, s.r.o. so spracovaním jeho osobných údajov, uvedených v tomto dokumente, pre účely uloženia do databázy uchádzačov o zamestnanie na dobu jedného roka, alebo do písomného odvolania v zmysle Zák. č. 122/2013 Z.z. o ochrane osobných údajov, v znení neskorších predpisov.
Pre množstvo reakcií, budeme kontaktovať len vybraných uchádzačov.
Do predmetu správy prosíme uviesť názov pozície o ktorú sa uchádzate.
K životopisu pripojte aj nasledujúci text, bez ktorého nebude možné Vašu žiadosť ďalej spracovať:
„ Osobné údaje vyplnil priamo uchádzač a dal súhlas spoločnosti c2i, s.r.o. so spracovaním jeho osobných údajov, uvedených v tomto dokumente, pre účely uloženia do databázy uchádzačov o zamestnanie na dobu jedného roka, alebo do písomného odvolania v zmysle Zák. č. 122/2013 Z.z. o ochrane osobných údajov, v znení neskorších predpisov.
Requirements for the employee
Candidates with education suit the position
Follow-up/Higher Professional Education
University education (Bachelor's degree)
University education (Master's degree)
Postgraduate (Doctorate)
University education (Bachelor's degree)
University education (Master's degree)
Postgraduate (Doctorate)
Language skills
English - Upper intermediate (B2)
Driving licence
B
Personality requirements and skills
- Min. 8 years in a manufacturing company (preferably automotive), with min. 2 years in a managerial position.
- Min. 5 years in composites production and process environment. Both strong practical and theoretical understanding of the production technologies of Prepreg/ Autoclave, RTM and press moulding. Experience with leading process improvement changes to production technologies and setting up standard work with the aim of reducing process variability, improving quality, reducing scrap.
- Min. 5 years in composites production and process environment. Both strong practical and theoretical understanding of the production technologies of Prepreg/ Autoclave, RTM and press moulding. Experience with leading process improvement changes to production technologies and setting up standard work with the aim of reducing process variability, improving quality, reducing scrap.
Advertiser
Brief description of the company
c2i is a high technology company designing, engineering, producing and marketing advanced composite (carbon, Kevlar and glass-fibre) products for industries such as motorsport, premium automotive, aerospace, defense, satellite communication, motorcycle and industrial. c2i also produces large models and tools - the machine park includes a 6 x 3 x 1.5m 5-axis milling machine, 3 axis milling machine, LECTRA cutter, large 3D Carl Zeiss measuring machine and autoclave.
Number of employees
200-249 employees
ID: 1736826
Datum zveřejnění: 26.1.2016
2016-01-26
lokalita: District Dunajská Streda Pozice: Process Engineer, Process Manager Společnost: c2i s.r.o.
Základní složka mzdy (brutto) a další odměny: Dohodou